camshaftsbp
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
camshaftsbp [2022/01/02 22:44] – [Camshaft Theory BP] imakeyoufast | camshaftsbp [2022/01/03 09:41] (current) – [Quotes] imakeyoufast | ||
---|---|---|---|
Line 17: | Line 17: | ||
If air or intake charge is pushed into the exhaust, NOx / HC emission increase. Also precious charge is wasted, resulting in higher BSFC. | If air or intake charge is pushed into the exhaust, NOx / HC emission increase. Also precious charge is wasted, resulting in higher BSFC. | ||
+ | |||
+ | **EVO exhaust valve opens (at)** | ||
+ | |||
+ | * Too early -> Gas goes through the exhaust valve and doesn' | ||
===== Rotrex Specific ===== | ===== Rotrex Specific ===== | ||
Line 139: | Line 143: | ||
- k24madness | - k24madness | ||
+ | ---- | ||
+ | The BP powerband shape is very sensitive to duration @.003. The few degree increase from a 4W to a 5A shifts peak torque a few hundred rpm. We found that an Integral stage 1 NB2 cam with a bit more lift but 10° more duration at .003 was no faster on track than the stock cams even though it made a bit more peak. If it is a 5 speed or driven on street with a stock longblock, we prefer stock cams for best driveability. Breathe on the longblock or do a full I/H/E +ECU and you can afford a little more duration as the low end improvements from the other stuff over up the losses from cams. For instance, the Tomei' | ||
+ | Add I/H/E + ECU with the Tomei' | ||
+ | - emilio700 | ||
+ | |||
+ | ---- |
camshaftsbp.1641159861.txt.gz · Last modified: 2022/01/02 22:44 by imakeyoufast