User Tools

Site Tools


camshaftsbp

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
camshaftsbp [2022/01/02 22:55] – [Camshaft Theory BP] imakeyoufastcamshaftsbp [2022/01/03 09:41] (current) – [Quotes] imakeyoufast
Line 143: Line 143:
 - k24madness - k24madness
  
 +----
  
 +The BP powerband shape is very sensitive to duration @.003. The few degree increase from a 4W to a 5A shifts peak torque a few hundred rpm. We found that an Integral stage 1 NB2 cam with a bit more lift but 10° more duration at .003 was no faster on track than the stock cams even though it made a bit more peak. If it is a 5 speed or driven on street with a stock longblock, we prefer stock cams for best driveability. Breathe on the longblock or do a full I/H/E +ECU and you can afford a little more duration as the low end improvements from the other stuff over up the losses from cams. For instance, the Tomei's we offer on a stock engine with just an ECU, are awful.
 +Add I/H/E + ECU with the Tomei's, particularly with a 6 speed and you have a great balance between powerband and peak power.
  
 +- emilio700
 +
 +----
camshaftsbp.txt · Last modified: 2022/01/03 09:41 by imakeyoufast